China Custom pe pp hdpe bottle washing recycling machine plant with Good quality

Product Description

Product Description

Rigid PE/PP/ABS/PS Bottle, Bucket, Hollow Container Recycling Machine
This pe pp hdpe bottle washing recycling machine plant is used to recycling the waste HDPE/LDPE/PP Bottles and buckets, hollow container and so on.
The production line including the conveyor belt, metal detector, plastic wet crusher, floting washing tank, high speed friction washer, centrifugal dewatering machine, drying system and label separating machine, material collecting packing system.
After crushing, washing and drying, we will get clean pe pp bottle flakes.

Product Parameters

Model

Capacity 

Installed Power 

Water Supply 

Area Required

MEB-300

300kg/hr 

130KW 

5-6m³/hr

38*4.5*5m 

MEB-500

500kg/hr

145KW

7-8m³/hr

38*4.5*5m

MEB-1000

1000kg/hr

190KW

8-10m³/hr

42*5*5m

MEB-1500

1500kg/hr

230KW

10-15m³/hr

45*5*5m

MEB-2000

2000kg/hr

280KW

15-20m³/hr

45*5*5m

Working Flow

— Belt conveyor: feeding the plastic bottles into the crusher. If there is any scrap metal inside the bottles, semi-auto metal detector is suggested.   
— S-series crusher: with water, crush plastic bottles into small size (size is adjusted as buyer request)
— Friction washing loader machine: washing out the sand, soil from the material and loading out the material
— Floating washing tank: washing out the dirty from the material
— Screw loader: loading the bottle flakes to the next step
— Horizontal friction washing dewatering machine: washing out labels, dirty and remove dirty water
— Floating washer tank: washing out the dirty from the material
— Screw loader: loading the bottle flakes into the next step
— Dewatering machine: remove the water from the material
— Hot air drying system: drying the bottle flakes
— Storage hopper: collect the flakes
— Control cabinet: control the line on/off (famous brand such as Schneider, Siemens, etc.)

This pe pp hdpe bottle washing recycling machine plant can be displayed “L” or “U” shape according to clients’ workshop.
We can also customize the washing line according to client’s material and product requirement.

Detailed Photos

Plastic Crusher Machine 

Function: crushing the material into flakes

>With water inlet can do wet crushing

>Use big roller bearing ensure durable use

>With heavy duty pulley easier for machine working
>Bearing house is installed outside of the chamber so no dirty goes inside which prolong the lifespan
> Upside hopper is covered by shelter so no flakes popped out.
>Blades adopt famous brand SKD-II or D2

Friction washing loader 

Function: Friction washing the material and loading up it

>With water injection system into the rotor for better washing and also clean the screen mesh
>The screen is with fast clip to tight and loose for easy maintenance
>Up and down both mounted with bearing design ensure low maintenance and long use life
>Machine washing part is made by stainless steel 304

Floating washing tank 

Function: Floating washing separate the sand, soil and other dirties

>The roller is specially made can have more washing for flakes but less water take out
>Bottom with positive and negative screw to pushing the dirty into middle

>With a side screw loader to loading out the sinking material
>Machine washing part is made by stainless steel 304

Horizontal dewatering machine 

Function: take out dirty and remover water from the bottle flakes

>With high rotary speed 1500rpm

>Roller bearing is fixed outside of the rotor for durable use
>Inside with mesh layer, mesh diameter size: 3mm
>With water spray system to clean the mesh
>With fan blower inside that can blow out the bottle flakes directly which saves 1 set of screw loader
>Outside cover drum is made by stainless steel with 3mm thicknes

Hot air drying system 

Function: with hot air further drying the plastic bottle flakes

>Heating by electricity

>Pipe is made with bigger and more thickness elbow for longer use

>Pipe is made by stainless steel with 3mm thickness

>Can select 2 sets of this pipe drying system to arrange 1 by 1 for better drying effect

Related Product

Double stage die-face cutting plastic pelletizing line                                         Double stage strand-cooling cutting plastic pelletizing line

Company Profile

ZheJiang MOOGE MACHINE CO.,LTD is a professional manufacturer specialized in designing, developing, manufacturing, and servicing a complete line of plastic recycling machine with over 10 years’ experience.
Our high quality machine and good service are all well received by numerous customers from domestic and overseas. We are expecting to make contribution to the global environmental protection and seek the long-term business partner all over the world.

Packaging & Shipping

• For the loose cargo we will packing by wooden box
• For the full container loading we are packing the machine by film and some on pallet accordingly
• We can ship the goods by air or by sea
• We will send pictures of cargo loading to our client to check and keep recording
• We can send cargo to client’s warehouse to loading

After Sales Service

• Pre-sale: we give our client the detailed technician offer, sign the sales contract etc.
• In-sales: we supply the details layout, installation instruction, and technician support for the clients.
• After sales: we arrange engineer to install the machine and train the workers for our client.
• We have 24 hours service line to solve the after sales problem.
• We have free spare parts with the machine.
• We supply long term spare parts for every customer.
• We always update the new technology to every customer.

In order to match your requirement and provide you a proper quotation, please Let us know:
• What material do you want to recycling? PE film? PP woven bag? HDPE/PP bottle? or other plastic?
• What capacity(kg/h) do you want?
• What is the final size(mm) of flakes you want?
• Other special requirements about the pe pp hdpe bottle washing recycling machine plant you want.

 

How to use the pulley system

Using a pulley system is a great way to move things around your home, but how do you use a pulley system? Let’s look at the basic equations that describe a pulley system, the types of pulleys, and some safety considerations when using pulleys. Here are some examples. Don’t worry, you’ll find all the information you need in 1 place!
pulley

Basic equations of pulley systems

The pulley system consists of pulleys and chords. When the weight of the load is pulled through the rope, it slides through the groove and ends up on the other side. When the weight moves, the applied force must travel nx distance. The distance is in meters. If there are 4 pulleys, the distance the rope will travel will be 2×24. If there are n pulleys, the distance traveled by the weight will be 2n – 1.
The mechanical advantage of the pulley system increases with distance. The greater the distance over which the force is applied, the greater the leverage of the system. For example, if a set of pulleys is used to lift the load, 1 should be attached to the load and the other to the stand. The load itself does not move. Therefore, the distance between the blocks must be shortened, and the length of the line circulating between the pulleys must be shortened.
Another way to think about the acceleration of a pulley system is to think of ropes and ropes as massless and frictionless. Assuming the rope and pulley are massless, they should have the same magnitude and direction of motion. However, in this case the quality of the string is a variable that is not overdone. Therefore, the tension vector on the block is labeled with the same variable name as the pulley.
The calculation of the pulley system is relatively simple. Five mechanical advantages of the pulley system can be found. This is because the number of ropes supporting the load is equal to the force exerted on the ropes. When the ropes all move in the same direction, they have 2 mechanical advantages. Alternatively, you can use a combination of movable and fixed pulleys to reduce the force.
When calculating forces in a pulley system, you can use Newton’s laws of motion. Newton’s second law deals with acceleration and force. The fourth law tells us that tension and gravity are in equilibrium. This is useful if you need to lift heavy objects. The laws of motion help with calculations and can help you better understand pulley systems.
pulley

Types of pulleys

Different types of pulleys are commonly used for various purposes, including lifting. Some pulleys are flexible, which means they can move freely around a central axis and can change the direction of force. Some are fixed, such as hinges, and are usually used for heavier loads. Others are movable, such as coiled ropes. Whatever the purpose, pulleys are very useful in raising and lowering objects.
Pulleys are common in many different applications, from elevators and cargo lift systems to lights and curtains. They are also used in sewing machine motors and sliding doors. Garage and patio doors are often equipped with pulleys. Rock climbers use a pulley system to climb rocks safely. These pulley systems have different types of pinions that allow them to balance weight and force direction.
The most common type of pulley is the pulley pulley system. The pulley system utilizes mechanical advantages to lift weight. Archimedes is thought to have discovered the pulley around 250 BC. in ancient Sicily. Mesopotamians also used pulleys, they used ropes to lift water and windmills. Pulley systems can even be found at Stonehenge.
Another type of pulley is called a compound pulley. It consists of a set of parallel pulleys that increase the force required to move large objects. This type is most commonly used in rock climbing and sailing, while composite pulleys can also be found in theater curtains. If you’re wondering the difference between these 2 types of pulleys, here’s a quick overview:

Mechanical Advantages of Pulley Systems

Pulley systems offer significant mechanical advantages. The ability of the system to reduce the effort required to lift weights increases with the number of rope loops. This advantage is proportional to the number of loops in the system. If the rope had only 1 loop, then a single weight would require the same amount of force to pull. But by adding extra cycles, the force required will be reduced.
The pulley system has the advantage of changing the direction of the force. This makes it easier to move heavy objects. They come in both fixed and mobile. Pulleys are used in many engineering applications because they can be combined with other mechanisms. If you want to know what a pulley can do, read on! Here are some examples. Therefore, you will understand how they are used in engineering.
Single-acting pulleys do not change direction, but compound pulleys do. Their mechanical advantage is six. The compound pulley system consists of a movable pulley and a fixed pulley. The mechanical advantage of the pulley system increases as the number of movable wheels decreases. So if you have 2 wheels, you need twice as much force to lift the same weight because you need a movable pulley.
The mechanical advantage of a pulley system can be maximized by adding more pulleys or rope lengths. For example, if you have a single pulley system, the mechanical advantage is 1 of the smallest. By using 2 or 3 pulleys, up to 5 times the mechanical advantage can be achieved. You can also gain up to 10 times the mechanical advantage by using multiple pulley systems.
The use of a single movable pulley system also adds to the mechanical advantage of the pulley system. In this case, you don’t have to change the direction of the force to lift the weight. In contrast, a movable pulley system requires you to move the rope farther to generate the same force. Using a compound pulley system allows you to lift heavy loads with ease.
pulley

Safety Issues When Using Pulley Systems

Pulleys have an incredibly unique structure, consisting of a disc with a groove in the middle and a shaft running through it. A rope or cord is attached to 1 end of a pulley that turns when force is applied. The other end of the rope is attached to the load. This mechanical advantage means that it is much easier to pull an object using the pulley system than to lift the same object by hand.
Although pulley systems are a common part of many manufacturing processes, some employers do not train their workers to use them properly or install protection to prevent injury. It is important to wear proper PPE and follow standard laboratory safety practices during pulley system activities. Make sure any support structures are strong enough to handle the weight and weight of the rope or rope. If you do fall, be sure to contact your employer immediately.

China Custom pe pp hdpe bottle washing recycling machine plant     with Good qualityChina Custom pe pp hdpe bottle washing recycling machine plant     with Good quality