China factory (100% Hot Sale) Fine Mineral Separation Sorting Equipment 6s Series Multi-Deck Shaking Table for Gold Separating Line near me shop

Product Description

(100% Hot Sale) Fine Mineral Separation Sorting Equipment 6S Series Multi-Deck Shaking Table For Gold Separating Line

  →Click here to Send Inquiry Now

Shaking table Introduction
Shaking table is 1 of the main equipment of gravity concentration, it is widely used in separating gold, tungsten, tin,tantalum, niobirm and other rare metals and precious metal ore.Shaking table can be used to deal with many kinds of metal ores,such as rough selection, elaborate selection, and scavenging. It also can select and sort coarse sand (2-0.5mm), fine sand(0.5-0.074mm), slime (-0.074) and other different particle sizes. What is more, shaking table can be used for sorting iron,manganese ore and coal. When dealing with tungsten, tin and other minerals,its effective recovery size is 2-0.02 mm. 40/60/88/120 riffles available.

Working Principle
The electric motor of the shaker drives the belt pulley to drive the crankshaft of the shaker device to move up and down by mean of a belt drive. When the rocker moves downwards, the mineral material enters through the groove in the inclined table surface of the double bar. Provide lateral impact water so that 1 side vibrates while rinsing. Specific gravity and particle size. Minerals with different densities flow out of the finer ore end of the bed and tailings in different directions,directly forming high quality concentrates due to ore With the replacement of the shaker, the equipment has greatly improved in terms of throughput and accuracy.

Marketing Countries: We have provided the gold shaking table for many customers such as from in South africa, Mali, Sudan, Mozambique, Nigeria, Vietnam, Ghana, Uganda, Zambia, Tanzania, Angola, Canada, Thailand, Chile, Peru, USA, Australia ect. For Alluvial chrome ore plant, copper ore plant, gold ore plant, iron ore plant, manganese ore plant, Silver ore plant, tin ore plant, tungsten plant ect.

Structure

Technical Parameter 

Name Coarse sand surface of table Fine sand surface of table Ore slime surface of table
Table surface Length (mm) 4450 4450 4450
Dimension Transmission end width (mm) 1855 1855 1855
  crude ore width (mm) 1546 1546 1546
Max. feeding size (mm) 2 0.5 0.15
Feed amount (t/h) 30-60 10-20 15-25
Feed density (%) 25-30 20-25 15-25
Capacity (t/h) 0.6-2.5 0.6-2.5 0.6-2.5
Stroke (mm) 16-22 11-16 8-17
Frequency ( f) 45-48 48-53 50-57
Water quantity added(t/h) 80-150 30-60 10-17
Horizontal obliquity (°) 2°30′-4°30′ 1°30′-3°30′ 1°-2°
Longitudinal obliquity (°) 1.4 0.92
Dressing Area (m2) 7.6 7.6 7.6
Cross-section Shape of table surface Rectangular Saw tooth  triangle
Motor Power (kw) 1.1 1.1 1.1
Transmission Mechanism Eccentric linkage

Successful case

Packing & Delivery

Related Product
Ball Grinding Mill→Click here to Send Inquiry

Wet Pan Mill→Click here to Send Inquiry

Spiral Chute→Click here to Send Inquiry

 About our factory
ZheJiang CZPT Mining Machinery Manufacturing Co., Ltd. is located in No.3 Chuangye Road. Xihu (West Lake) Dis. In dustrial Park. Xihu (West Lake) Dis. County. HangZhou City. ZheJiang Province. China.Our company is engaged in the mineral processing equipment research, development, design and production for many years history, has accumulated rich experience in design and production. Enterprise in mineral processing equipment industry has had a positive effect, set up the good reputation. And mainly the manufacture of the products like as Shaking table. Flotation equipment. Crushing equipment. Magnetic separator. Screening equipment. Classifying equipment. Agitation tank, Feeding equipment. Gravity separation equipment. Wet separation equipment. Spiral chute. Saw-tooth wave jig and Diaphragm Jig. Grinding equipment. Ball mill. Slurry pump. Centrifugal pump, Conveying equipment.

We manufacture various types of mineral processing machinery and equipment according to our customers’ requirements. Our products are widely used for sorting gold, silver, copper, iron, tungsten,lead. zinc. tin. molybdenum, nickel, tantalum, niobium, manganese ore, coal, monazite, rutile,diamonds, other precious metals and precious metals mine, and for the flotation colored, black metal,precious metals and other minerals. And we have export qualifications, our products sell well all over the world for several years, especially exported to Brazil. India. Indonesia.South Africa. Somalia, Philippines. Malaysia. Sudan, Nigeria. Iran, Russia, Ghana. Kazakhstan Kyrgyzstan.Cambodia,Vietnam,Korea,Mongolia and other countries.

 

Our service

 1.Pre-sale services:
  (1)Select equipment model;
  (2) Design and manufactLire products according to clients’ special requirement;
  (3)Train technical personnel for dients.

2.Services during the sale:
(1) Pre-check and accept products ahead of delivery;
(2)help clients to draft solving plans.

3. After-sale services:
(1) Assist dients to prepare for the first construction scheme;
(2)Install and debug the equipment;
(3) Train the first-line operators on site;

FAQ

Q: Are you trading company or manufacturer ?

A: We are factory.not dealer.Direct factory sale makes price more competitive.

Q: How long is your delivery time?

A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

Q: Do you provide samples ? is it free or extra ?

A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: What is your terms of payment ?

A: Payment=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below:

 

Types of pulleys and their advantages and disadvantages

There are several types of pulleys. Learn the basic equations of the pulley system. Then learn about the different uses for pulleys. The disadvantages of using pulleys will be covered. Knowing these, you can buy the pulley that suits your needs. Here are some of the best pulley types and their pros and cons.
pulley

Basic equations of pulley systems

A pulley system is a mechanism that allows 2 blocks of a certain mass to be connected by a taut rope. The acceleration of each block is the same in magnitude and direction. The external force acting on each block is the weight of the block (10g) and the tension in the string. The tension between the 2 blocks is the total tension and the force acting on the pulley is the weight of the 2 blocks.
This simple mechanism uses 2 simple equations to explain how the system works. First, the mass of the weight on both sides of the pulley must be the same. When the weight is forced to move, the rope tightens and the second pulley descends. The weight is also attached to the second pulley and must be the same distance as the first pulley. This will result in a speed ratio of 2 times the distance covered by the first pulley.
Second, we have to calculate the force required to lift the object. The lower mass is supported by a wire configuration passing through all pulleys, while the uppermost pulley is used to apply the force. The lower block is used to support the weight. The applied force needs to travel a distance nx to move the weight. This distance, called MA, can be written as:
Once we have gathered the necessary information, we can apply the calculations to the pulley system. We can also use the Mechanical Advantage Calculator to calculate the force on the anchor. To do this, we must apply a force to the load as well as to the pulley itself. Using this equation, we can calculate the force required by the load to lift the load.
pulley

Types of pulleys

There are 3 basic types of pulleys: movable, fixed and compound. Both types of pulleys translate the force applied to them. The ideal mechanical advantage of pulleys is two. This is because a single movable pulley only doubles the force, whereas a compound pulley doubles or triples the force. This type of pulley is often used with other types of pulleys.
Movable pulls move with the weight of the load, and the force pulling them increases on the lift side. They are often found in utility elevators and construction cranes. These systems are very simple, inexpensive and quiet to use. The force required to lift the object depends on the mechanical advantage of the system. The 2 most common types of pulleys are listed below. Let’s take a closer look at each one.
V-shaped pulleys are used in vehicles and electric motors. These pulleys require a “V” belt to function properly. Some have multiple “V” grooves to avoid slipping. They are used in heavy duty applications to reduce the risk of power slip. These pulleys also have more than 1 “V” groove. V-belt pulleys are commonly used in vehicles and electric motors.
Composite pulleys are made from more than 1 type of cable or rope wrapped around the wheel. They can be fixed or hinged and are usually made of stainless steel or bronze. Composite pulleys have multiple layers and can be a single unit or many different components. There are 3 main types of pulleys: fixed pulleys and composite pulleys. These are the most common types. Almost every type of pulley is used for some type of application.
Fixed pulleys have 1 advantage over movable pulleys: they change direction as the weight of the load increases. They are typically used in heavy construction equipment. Gun tackles, patio tackles, and stationary tackles are examples of equipment that use a pulley mechanism. These devices are very common and can be found on most modern construction sites. They provide great convenience for lifting large loads.

application

What are the applications of pulleys? Simply put, a pulley is a mechanical device that transforms a difficult task into an easier one. It consists of ropes and pulleys. It is usually used to lift objects. Usually, people wrap a rope around a pulley and pull up to lift the object. One disadvantage of using pulleys is that they require the same force as lifting the object directly.
One of the most popular applications of pulleys is lifting heavy objects. They help people pull up heavy objects and blocks. The system can also be used in seeders, lifts, grinders, etc. Other applications include raising flags, loading cargo, pulling curtains and rock or mountain climbing. Students can learn about the various uses of pulleys and the physics behind them.
Pulleys can be made of many different materials, depending on the application. Some are movable, which means they move with the object they are used to lift. This pulley system can be made of nylon, wire rope or fiber material. The best part about these systems is that they are easy to install and maintain. For a better grasp, use the guide or video tutorial to learn more about the pulley system and how it works.
Tapered pulleys are common in paper mills. They are high-quality pulleys that transmit power to connected parts. They can be dynamic or static and have different balances. Because pulley systems are highly customized, most industrial applications require systems designed specifically for specific applications. In this way, the system is safe, simple and inexpensive. The benefits of this design are endless.
The most common use of pulleys is for motor drives. They are used to minimize noise by applying force to the shaft to reduce the workload. They are also less expensive than gears and do not require lubrication. Furthermore, they can change the direction of the applied force. They are also less expensive than gears and are often used with other components. A screw is a cylindrical member with helical ribs used to connect something.
pulley

shortcoming

Although the pulley system makes it easier to move heavy objects, it still has some drawbacks. When using a pulley system, you must remember that the force required to lift the weight increases with the number of cycles. In addition, the distance between the puller and the heavy object increases, which may lead to accidents. Also, moving heavy objects can be tricky if the rope slips. Pulley systems are not very expensive and can be easily assembled. However, it does require a lot of space.
First, it is not efficient. Besides being inefficient, pulleys produce different forces at different speeds. Fixed pulleys use more force than the load, while movable pulleys move with the load. A movable pulley requires less force than a fixed pulley, but the combined system travels a long distance. Therefore, this method is not as efficient as the fixed method.
Pulleys are not only used in industrial processes. You can see them in various places in your daily life. For example, large construction cranes use pulleys to lift heavy loads. Even flagpoles, blinds, clotheslines, ziplines, motors and climbing equipment use pulleys. Still, despite their advantages, the disadvantages are not too serious.
Another disadvantage of the pulley is its wear and tear. While a pulley’s housing is theoretically infinite, its bearings and locking components typically wear out over time. To overcome this problem, a new bearing and locking assembly can be installed. No need to replace the housing and shaft, the entire assembly can be re-bonded and painted to replicate the original look. Alternatively, the pulley can be replaced with a new housing and shaft.
Using pulleys can also reduce the advantage of pulleys. On the other hand, interception and tackle is a system in which 2 pulleys are connected to each other using ropes. Unlike pulleys, pulley pulley systems can be adjusted in the direction of travel and can move heavy loads up to 4 times their force when used in hydraulic lifts.

China factory (100% Hot Sale) Fine Mineral Separation Sorting Equipment 6s Series Multi-Deck Shaking Table for Gold Separating Line     near me shop China factory (100% Hot Sale) Fine Mineral Separation Sorting Equipment 6s Series Multi-Deck Shaking Table for Gold Separating Line     near me shop