China Good quality Automatic Glass All Sides Edging Line (including Grinding machine and Linear rotary table) near me supplier

Product Description

Glass Edger Line include No.1 Grinding machine, No.2 Linear rotary table, No.3 Grinding machine. It can replace some accessories to meet the glass deep processing specific requirements, part of the video and pictures in the product description may show a custom machine that bases on this model, please consult us online for more details.

No.1 & No.3 Double side straight line grinding machine

The equipment is suitable for grinding flat glass, which is suitable for flat bottom rough grinding, fine grinding, and up and down chamfering can be completed at 1 time (our company can be equipped with glass cleaning equipment and automatic loading and unloading manipulators), using double linear guides, double rolling ball screws, Realize stable and accurate automatic opening and closing. The glass transmission is controlled by the frequency converter, the control software is designed by itself, and the touch screen is used for control.

 

Machine parameters:
 

Touch screen: ZheJiang Delta

PLC: ZheJiang Delta

Inverter: ZheJiang Delta

Rotary encoder: Japan Omron

Switching power supply: ZheJiang Delta

Motor: ZheJiang CZPT special grinding head motor (3.0Kw & 2.2Kw & 1.1Kw)

Timing belt: 40mm wide

Timing pulley: aluminum alloy

Optical inspection switch: FC

Ball screw: ZheJiang TBI (φ25mm)

Xihu (West Lake) Dis. rail: ZheJiang HIWIN (25mm)

Transmission motor: domestically equipped with reducer (1.5Kw)

Water pump: domestic submersible pump (1.1Kw)

Water tank: stainless steel

Drive shaft: chrome-plated optical axis (φ40mm)

Total weight: 1600Kg

Installed power: 17.5Kw

Power supply: 380V/50Hz

Grinding wheel diameter: φ130mm-φ150mm 

Technical parameters (customizable):
 

Maximum processing width: 600mm

Minimum processing width: 200mm

Processing glass thickness: 2-12mm

Speed range: 2-10 m/min

Parallelism: ≤±0.25mm/m

Diagonal: ≤±0.45mm/m 

 

No.2 Linear Rotary Table Model SY-2060
 

After receiving the glass from the No. 1 grinding machine, the rubber wheels are arranged at an angle to accelerate the movement. The glass walks against the reference edge, and then contacts the nylon material stop. The glass changes its direction by 90 degrees and enters the No. 2 Grinding machine.

Machine parameters:
 

Transmission shaft: chrome-plated optical axis (φ30mm)

Rubber wheel: polyurethane (φ90mm)

Sprocket chain: domestic

Transmission motor: domestically equipped with reducer (0.55Kw)

Inverter: ZheJiang Delta

Optical inspection switch: FC
 

Technical parameters (customizable):
 

Total weight: 850Kg

Installed power: 0.55Kw

Power supply: 380V/50Hz

Processing range: 200*200-600*600mm

Rotation angle: 90°

The automatic glass edging machine is suitable for edging 2-12 mm glass such as float glass, safety glass, ultra-thin glass, insulating glass and art glass, and we can provide free edging sample. the utility model edging machine can realize the edging of various shapes. The edging efficiency is high, the operation is convenient and simple, and the operator has no technical requirements. 

Our factory has an experienced design team and each designer has at least 15 years of work experience in the machinery industry. We have designed and manufactured glass deep-processing lines for many large and medium-sized enterprises in the world. At present, we have acquired more than 50 patents, most of which are the advanced level in the industry. After years of experience and customer feedback, we have continuously designed machines that are more in line with customer needs, and all of our machines on sale can be customized to customer’s glass processing requirements.

Our products are mainly advanced intelligent glass processing equipment which include: glass loading machine; fully automatic, semi-automatic glass cutting machine; bilateral and unilateral glass edge grinding machine; various types of ultra-thin glass cutting machine and edging machine; ordinary, curvature, ultra-thin glass cleaning machine; glass rod, brick, tube, bottle, household utensils and optical material cutting machine; glass drilling machine, and all kinds of customized automation equipment, etc.

ZheJiang Ruihenghao international trade Co., Ltd. is a high-level corporate specializing in the production of glass machinery, and integrating trade, research and development and manufacturing. Our factory covers an area of more than 40,000 square meters, a total investment of more than 200 million yuan, the existing staff of more than 80 people. Our products are widely used in construction, electrical appliances, electronics, communications, vehicles, optical glass, glass ceramics, glass furniture, glassware, glass crafts and many other fields. Core products play an irreplaceable role in the relevant industry chain.

There are experienced overseas engineers and online services in our factory for customer to ensure the machine runs properly in workplace, and all machines are with one-year warranty, and maintained for life! In addition, we can provide some additional accessories with shipment as customer needed such as CNC cutting machine belt and manual cutting machine U-shaped tool rest.
 

What makes pulleys so important?

A pulley is a simple tool that makes it easy to lift or move heavy objects. There are many uses for this tool, but let’s take a look at their mechanical advantages. There are several types and many applications, along with their benefits and costs. So what makes them so important? Read on to find out! Below are some of the most common uses for pulleys. Let’s dive into them.
pulley

Mechanical advantage

If you’ve ever used rope and pulley systems, you’ve probably noticed their usefulness. A 3:1 mechanical advantage system is like a 300-pound load being moved 1 foot up by 3 feet of rope. Then you can imagine using the same rope to get into a small space. The same principle applies to limited spaces, and a simple mechanical advantage system is just what you need for this purpose.
Assuming frictionless bearings, a single movable pulley can have 2 mechanical advantages. It is attached to a heavy object and requires the pulling force exerted by the jack to lift the heavy object. However, when you use a compound pulley, the force exerted on the rope to lift the object changes direction. The 3 factors used to measure machine efficiency are force, distance, and relative motion.
The mechanical advantage of the pulley is that it reduces the effort required to lift weights. When the rope is attached to the 2 wheels, applying a force of 500 Newtons can lift a mass of 100 kg. This mechanical advantage is why 2 rings in a pulley are better than one. Therefore, using a pulley system will save you energy. You can also use branches instead of ropes and pulleys.

type

There are several different types of pulleys. They can be simple or complex, depending on how they are connected. Simple pulleys have a grooved wheel on 1 end and are attached to an axle. These pulleys are used to lift heavy objects. They are often found on sailboats, and you can even see them on construction sites. On the other hand, stationary pulleys are attached to stationary structures, such as flagpoles. Fixed pulleys can also be used to lift loads from trucks or trains. Pulleys are also commonly used in wells.
Fixed pulley systems use rollers or single wheels. These pulleys are usually made of nylon or wire rope. They are used in heavy duty applications. They are also used in electric motors. A “V” pulley requires a “V” belt to transmit power. Some of these pulleys have multiple “V” grooves to reduce the risk of power slipping. Once installed, fixed pulleys are suitable for many applications.
Simple pulleys are simple pulleys. It has a pulley mounted on an axle and a rope at 1 end. Rope can be used to pull objects, while plastic pulleys can carry lighter loads. There are 2 main types: heavy duty and simple pulley systems. In either case, their function is the same: they change the direction in which the seat belt is fastened. So when comparing the two, it’s easy to decide which 1 is best for you.
pulley

application

Pulley systems are simple machines used for a variety of industrial and mechanical tasks. Its design parameters and benefits have improved over the years, but they remain essential for many applications. Let’s take a look at some of the most common applications of pulleys. The applications for pulley systems are endless, from construction to mining, from transportation to packaging. Read on to learn more!
Pulley systems are often used to lift large objects, such as blocks, that might otherwise be too heavy to lift. It also makes the exploration process easier by helping people pull heavy objects into place. It is also widely used on sailing ships. Due to its low cost of use and no need for lubrication, it is a practical choice for many applications. It can be used to lift heavy objects and support long ropes.
The pulley system allows you to change the force required to move the object. For example, a two-wheel pulley system is especially useful for reducing the effort required to lift large objects. The mechanical advantage increases with the number of wheels in the system. In addition, the mechanical advantage of a two-wheel pulley system depends on the ratio of the load weight to the number of rope segments in the system.

cost

In most cases, an idler replacement will cost around $150, but the exact cost will depend on several factors, including the make and model of the car. The cost also depends on the type of idler you need and the cost of the OEM parts. Some pulleys are easy to replace at home, while others require specialized tools, such as pulley wrenches. The chart below shows the cost of popular vehicles. Prices are valid at the time of writing.
The diameter of the pulley is also important, this should be about 60% of the diameter of the active pulley. You can also purchase compensating pulleys at factory prices. Be sure to select the correct size before placing the pulley on the machine. Also, make sure you have enough space for the pulleys. Once you have the desired pulley size, you can determine the best type of belt to install.
While this method is the most common type of belt drive, there are other methods of spinning cup blanks directly from a flat metal disk. One such method is described in US Patent No. 5,500,31. US Patent No. 1,728,002 and shows a method of making a dynamically balanced V-groove pulley. Using a headstock die with sliders increases the cost of the pulley. In addition, different cup blanks require different molds.

lubricating

The lubrication of pulley bearings is relatively simple. The pulley itself rotates smoothly with little vibration. Bearing contact loads are relatively low, and well-lubricated pulleys operate near ambient temperatures. Here are some tips for properly lubricating pulley bearings. Make sure to lubricate the nozzle before applying grease.
Check grease, elastic ring, pulley bearing clearance once a year. If the elastic ring of the pulley is damaged or the roller bearing on the associated pulley is damaged, replace the pulley. Also, check the running noise of the pulleys to see if they are making noise. Check the bearing, damage to the elastic ring may indicate bearing failure or roller failure.
Proper lubrication is critical to the life of the rotating pinion. Avoid exposure to sunlight or water. Protects the pinion meshing area from hard impurities. Liaise with crane operators and lubricators during maintenance and lubrication operations. They should know how to avoid pitfalls in the lubrication process. In case of malfunction, please contact service personnel and take necessary measures.
pulley

Compound Pulley System

A compound pulley system is used to lift heavy objects. These systems can use ropes or cords of different sizes. In general, the total weight of all ropes must be less than the weight of a single rope. The system can be used in large areas, but may not be suitable for smaller spaces. To learn more about compound pulleys, read on! Here are some helpful tips. 1. Understand the difference between single wheel and compound wheel
A composite pulley system consists of 3 components: a drive pulley, 1 or more driven pulleys, and 2 pulleys. The drive wheels are usually connected to shafts that are connected to the engine or transmission. The driven wheel is a separate unit mounted on the same shaft as the drive wheel. A compound pulley system helps lift heavy loads. These pulleys are the most common type of pulley system in use today.
Composite pulley systems are widely used on construction sites. They save energy by spreading the weight of heavy loads over multiple smaller loads. This means that the elevator does not have to use high-capacity lifting equipment. Additionally, the compound pulley system allows users to easily adjust power distribution to meet their individual needs. They can also use more than 2 ropes if necessary. This increases the range of motion of the lift arm.

China Good quality Automatic Glass All Sides Edging Line (including Grinding machine and Linear rotary table)     near me supplier China Good quality Automatic Glass All Sides Edging Line (including Grinding machine and Linear rotary table)     near me supplier