China high quality 2500mm Low-E Glass Cleaning and Drying Machine Glass Washing Machine with Good quality

Product Description

  1. Structure Features
    1. The machine structure is aluminum alloy assembled structure, never scrap, with permanent service life, and it is high efficiency machine which can save 70% energy. The machine is for washing glass before tempering, after edging and before screen printing.
    2. Other structure parts are top- grade powder coated which is better than paint and make machine surface corrosion resistance
    3. All transmitting rubber rollers of the machine are vulcanized rubber with SS304 shaft (They are forbidden to contact with acidic liquids.), which can reduce secondary pollution for glass caused by rust, to achieve requirements for high quality wash.
    4. Washing section and other parts contacted with water are made of stainless-steel material to reduce secondary pollution and rust problem.
    5. Washing section and drying section can be lift up max.to 350mm as a whole, which is convenient to wash and maintain. Two times protect: digital control stroke protection, safety limit switch protection.
    6. The machine has 3 pairs of brushes (φ160mm) with SS304            shaft. Washing LOW-E glass function: can wash LOW-E glass, ordinary coated and solar coated glass without any scratch on surface.
    7. The machine has 2 pairs of air knife made of stainless steel and aluminum, which has large wind and good drying effect. The machine has air heating system.
    8. Blower has air filter in air inlet, big airflow and excellent drying effect. The whole blower is installed on the top of machine to save space and it can be risen up together with washing and drying section, and the air filter is on the side for convenient inspection and cleaning. Air filter is need to clean every 7 days.
    9. Main drive is gear drive, frequency speed control and digital display. Brush roller drive of washing section is drove by upper and lower motors with separate belts. With the advantages of automotive pulleys without tension wheel, flexible brush rotation, high precision, etc., brushes have smooth speed and long service life and can wash special glass which needs high quality clearance.
    10. The machine is control by mechanical button and with digital display, which is convenient of workers operation. It’s the best choice for saving labor if connect with other machines. Connected frequency conversion, other machine can control washing machine speed.
    11. Water tanks of machine are movable and beside machine which is easy for cleaning, changing water, checking, etc., and make washing effect better.

 

2.Technical Parameters

 

Model No. Max. Glass Width Min. Glass Size Glass Thickness  Max. Speed Total Power Machine Size Machine Weight
FGW-HW2500C 2500mm 400*400mm 3-25mm 12m/min 35KW 5500*4500*2840mm 3840KGS

FAQ:

Q1: Are you a trading company or a manufactory?
A1: We are a manufactory, we supply the factory price with good quality, welcome to visit !

Q2: Why choose CZPT ?
A2: The founder of the company  engaged in machinery manufacturing industry almost 20 years, professional production and export of high-quality glass processing machinery,  industrial automation machinery, etc. , exported to all over the world, we have been committed to doing a good job of products, service every customer. 

Q3: Machine warranty specifications ?
A3: We will provide lifelong maintenance service, solve problems for customers free of charge, eliminate all the troubles of customers. For machines beyond the warranty period, we will continue to providing follow-up services. The spare parts just charge the cost price. The founder of the company  engaged in machinery manufacturing industry almost 20 years, professional production and export of high-quality glass processing machinery, etc. and exported to all over the world, we have been committed to doing a good job of products, service every customer. 

Q4: This is the first time I buy glass machine, is it easy to operate?
A4: We can provide the operation manual or video for guiding. If it is hard for you learning, We can help you by “Team viewer” online, with telephone or WhatsApp explain. And We will send our engineers to your factory to install the machines and train your staff how to operate the machines.

Q5: How to choose a suitable machine ?
A5: You can tell us working piece material, size, and the request of machine function. We can recommend the most suitable machine according to our experience.

Q6: How can I trust your company and your products ?
A6: The whole production procedure will be under regular inspection and strict quality control. The complete machine will be tested to make sure they can work very well before being out of factory. The testing video and pictures will be available before delivery.

Q7: If machine have any problem after I ordered it, what could I do ?
A7: Free parts send to you in machine warranty period if machine have problem. Lifelong free after-sales service for machine, please feel free to contact us if your machine have any problem. We will give you 24 hours service from telephone or WhatsApp.

Q8: How about the spare parts?
A8: A spare parts list is available for you and you can purchase in cost price.

What is a pulley?

Pulleys are shafts or wheels on a shaft that support the movement and change of direction of a taut cable. The pulley also transfers power from the shaft to the cable. A simple pulley is used to raise the school flag. Read on to learn about the basic types of pulleys. We also covered the use of pulleys in everyday life. Read on to learn more about this important mechanical part.
pulley

composite pulley

A composite pulley is a mechanical system where 2 or more pulleys and ropes are connected together. It reduces the force required to lift the load because the force is divided by the distance of each pulley. Distance is equal to the mass of the object. Composite pulleys are a common mechanical system on sailboats. Composite pulleys can be used to lift heavy equipment such as sails.
The compound pulley unit consists of 2 pulleys, 1 fixed and the other movable. The fixed pulley is fixed overhead, while the movable pulley is connected to the load by a chain. The lift applies force to the other end of the rope. Anchor points are attached to fixed joists, ceiling joists or sturdy branches. The chain should be long enough to support the load during lifting.
Composite pulleys can be made from a variety of materials. Some are fixed and remain fixed. Others are detachable. The composite pulley combines the advantages of both types, making it a versatile tool. In the table below, these 3 types of pulleys are compared. It’s easy to see which 1 is best for your needs. The right choice depends on your specific needs and budget.
The compound pulley system consists of 2 fixed pulleys and 1 movable pulley. The compound pulley system multiplies the force by a factor of 2. The compound pulley system is particularly suitable for heavy loads and is ideal for construction sites. Workers apply less than half the load force on the composite pulley, significantly reducing the force required. This is a major benefit for many people.

Fixed pulley

Fixed pulleys are fixed gears of fixed length that are mounted on solid objects. There are many different types of pulley systems. Some cooperate with each other, but not “fixed”.
Fixed pulleys can be used for a variety of purposes. One application is to lift small objects. They have a one-to-1 mechanical advantage. Often, a single pulley can lift small loads. The force required to lift a single fixed pulley remains the same. They are usually used to lift lighter objects. They can even be attached to buckets used to draw water from wells.
While single fixed pulleys have desirable mechanical advantages, they are not suitable for force multipliers. Because their mechanical advantage diminishes over time, they are not effective force multipliers. They are used to redirect work so that it can be applied in the most convenient direction. This mechanical advantage is the main advantage of fixed pulleys and the most common way of moving objects. They have several benefits, including the ability to increase the speed of moving objects.
Another application for fixed pulleys is lifting supplies. A scaffold can weigh more than 1 and can be directly hoisted. In order to facilitate the transportation of materials, fixed pulleys are usually installed on the top of the scaffolding on construction sites. Then thread the rope through the edge of the groove that holds the pulley. The fixed pulley exerts the same force on the pull side as on the push side. The same is true for moving objects with fixed pulleys.
pulley

moving pulley

A movable pulley is a device whose part is fixed to another object, usually a rod or beam. The movable part moves with the load, making the load feel lighter. This is a useful tool for those who need to carry heavy items such as large bags. The advantages of moving pulleys are many. Here are some of them. Read on to learn more about them.
One of the most common uses of movable pulley systems is climbing high objects. Climbers act as pulley loads and pull ropes to lift objects. Eventually, when the traction stops, the climber descends. However, it is still a useful tool in other situations. The movable pulley system can help you climb the tallest objects or lift them to level surfaces.
Another example of movable pulleys is in industry. Depending on the load, movable pulleys make handling and moving loads easier. You can use them in a variety of applications in manufacturing and industry, including cleaning. For example, the American flag is raised and lowered every day. Removable pulleys are a handy tool when buildings need cleaning.
If you’re not sure whether a task requires a pulley, a zipline might be a good option. Connect the 2 ends of the rope and the pulley will move along the rope, then attach the rope to the metal cable. The load is the person holding the pulley, and the force comes from the attachment on the other end of the rope. There are 2 types of live pulleys: simple pulleys with just 1 wheel and live pulleys with many ropes attached.

School flag raised with simple pulleys

How is the school flag raised? It is pulled up by a rope attached to a pulley at the top of the pole. When the rope is pulled, the pulley turns, raising the flag. A pulley is a simple mechanism that helps people move heavier objects with ease. The rope must be securely attached to the pulley to keep the flag stable.
A simple pulley is a spinning wheel with grooves on 1 side and ropes on the other. The rope can be any length and the wheels can be any size. The rope has to go through the groove and the load is attached to the other end of the rope. Simple pulleys are pulleys with fixed shafts. An example is the wheel on a school flagpole.
A simple pulley system consists of a primary pole, a secondary pole and an outer member. The primary flagpole is connected to the track by a detour, while the secondary flagpole is connected to the track by a pipe. There is a groove on 1 side of the track, which passes through the inner cavity of the flagpole. An open track at the upper end of the track connects the 2 parts of the pulley.
A simple pulley can be used for many purposes. This is a useful machine that can be used to raise the flag. Among other things, it can be used in clothing lines, bird feeders, and even roofers. And, of course, you can use the pulley to raise the flag. Its versatility makes it an essential part of school decor.
pulley

cast iron pulley

If you are looking for pulleys for your machine, you may come across cast iron pulleys. They are usually cheap and available in a variety of sizes. The rim is held in place by a mesh attached to a central boss. The arms and spokes can be straight or curved, but most are oval. There are many uses for this type of pulley.
You might wonder why the arms of cast iron pulleys are so curved. Bent arms tend to yield rather than break. Cast iron pulleys are usually round with a slight bump on the rim, which helps keep the belt centered on the rim as it moves. On a 300mm diameter pulley, the bumps may be as small as 9mm.

China high quality 2500mm Low-E Glass Cleaning and Drying Machine Glass Washing Machine     with Good qualityChina high quality 2500mm Low-E Glass Cleaning and Drying Machine Glass Washing Machine     with Good quality