China Standard Xgf-8-8-3 Glass Bottle CZPT Rinsing Filling and Capping Machine with Good quality

Product Description

 XGF-8-8-3 Glass Bottle Beverage Rinsing Filling and Capping Machine


XGF8-8-3 bottle washing/filling/sealing 3 in 1 machine is a new product developed on the basis of importing Italian filling technology. The machine integrates washing, filling and sealing. Its design is scientific and reasonable, its shape is beautiful, its operation and maintenance are convenient, and its automation is high. It is mainly suitable for filling glass bottle drinks. Only a small amount of spare parts need to be replaced, which can be used for various bottle types.
Main structural features
High quality platform panel and channel steel are used as chassis with 304 stainless steel layer, 304 stainless steel frame and adjustable stainless steel foot.
Bottle feeding mechanism
Bottle feeding mode of direct connection between bottle feeding line of upper bottle table and bottle feeding pulley. With the transfer technology of dialing wheel and supporting bottle, it can enter the filling line steadily. Users do not need to adjust the height of equipment when changing bottle shape. They only need to replace nylon dialing wheel and bottle guard plate.
Rotary bottle washing section
The number of bottle-washing chucks is 8. The bottle-punching pliers grasp the bottle steadily and reliably, and the bottle-punching efficiency is high. More bottle-punching stations are set up, and the time of bottle-punching is prolonged (about 15% can be prolonged), which can improve the effect of bottle-punching better. All rotating discs are welded with stainless steel AISI304. The flip type bottle clamp is used to clamp the bottleneck part, which avoids the possible pollution of the rubber clamp on the traditional bottle clamp to the thread part of the bottle mouth. The bottle clamp is made of stainless steel AISI304, which is hygienic and durable. The flushing nozzle is used as an efficient spray nozzle, which can be washed to any part of the inner wall of the bottle, so that the flushing effect is the best.
Rotary filling part
The number of filling valves is 8, and the contact parts with the products are 304 stainless steel. The inner and outer surfaces of the filling cylinder are polished by mirror.
The filling machine adopts German technology and satisfies the requirement of full filling.
The filling valve is lifted and lowered by the valve lifting mechanism under the action of cam. The filling valve opens after contacting the bottle mouth to complete the filling process.
Rotary capping part
The number of capping heads is 3. Horizontal capping device has the function of no damage to the surface of the bottle cap and automatic transmission of signal to cover the fewer caps in the hopper.
Ligating part
The capping system reduces the secondary pollution to the bottle cap. 304 stainless steel lower capping trough, capping trough and lower capping trough are equipped with an electronic capless detection system, which can automatically control the capping machine and the running speed of the whole machine. No bottle without cap can be realized.
Power System
Variable-frequency speed regulation, each movement mechanism adopts open gear transmission, which has high efficiency, low noise, long service life, convenient maintenance and smooth operation. Each bottle-feeding star wheel is an engineering plastic part with safety protection mechanism to ensure the safety and reliability of the equipment.
Electronic Control System
Electric control cabinet PLC automatically completes the whole process control of three-in-1 bottle filling machine from bottle entry to bottle exit. Use touch screen operation.
Technical Parameters:

Project Technical Parameter
Work Station Rinsing 8 ,Filling 8,Roll Capping 3(Metal cap)
Maximum production capacity  
Bottle specification Bottle Body Φ50-Φ90mm,Bottle Height H=150-320mm,Bottle open Φ20-Φ35mm
Motor power 3.75 KW
Rated voltage 380V /3/50hz (or made to need)
Shape size 2000*1650*2200(mm)
Equipment weight 3000Kg

Types of pulleys and their advantages and disadvantages

There are several types of pulleys. Learn the basic equations of the pulley system. Then learn about the different uses for pulleys. The disadvantages of using pulleys will be covered. Knowing these, you can buy the pulley that suits your needs. Here are some of the best pulley types and their pros and cons.

Basic equations of pulley systems

A pulley system is a mechanism that allows 2 blocks of a certain mass to be connected by a taut rope. The acceleration of each block is the same in magnitude and direction. The external force acting on each block is the weight of the block (10g) and the tension in the string. The tension between the 2 blocks is the total tension and the force acting on the pulley is the weight of the 2 blocks.
This simple mechanism uses 2 simple equations to explain how the system works. First, the mass of the weight on both sides of the pulley must be the same. When the weight is forced to move, the rope tightens and the second pulley descends. The weight is also attached to the second pulley and must be the same distance as the first pulley. This will result in a speed ratio of 2 times the distance covered by the first pulley.
Second, we have to calculate the force required to lift the object. The lower mass is supported by a wire configuration passing through all pulleys, while the uppermost pulley is used to apply the force. The lower block is used to support the weight. The applied force needs to travel a distance nx to move the weight. This distance, called MA, can be written as:
Once we have gathered the necessary information, we can apply the calculations to the pulley system. We can also use the Mechanical Advantage Calculator to calculate the force on the anchor. To do this, we must apply a force to the load as well as to the pulley itself. Using this equation, we can calculate the force required by the load to lift the load.

Types of pulleys

There are 3 basic types of pulleys: movable, fixed and compound. Both types of pulleys translate the force applied to them. The ideal mechanical advantage of pulleys is two. This is because a single movable pulley only doubles the force, whereas a compound pulley doubles or triples the force. This type of pulley is often used with other types of pulleys.
Movable pulls move with the weight of the load, and the force pulling them increases on the lift side. They are often found in utility elevators and construction cranes. These systems are very simple, inexpensive and quiet to use. The force required to lift the object depends on the mechanical advantage of the system. The 2 most common types of pulleys are listed below. Let’s take a closer look at each one.
V-shaped pulleys are used in vehicles and electric motors. These pulleys require a “V” belt to function properly. Some have multiple “V” grooves to avoid slipping. They are used in heavy duty applications to reduce the risk of power slip. These pulleys also have more than 1 “V” groove. V-belt pulleys are commonly used in vehicles and electric motors.
Composite pulleys are made from more than 1 type of cable or rope wrapped around the wheel. They can be fixed or hinged and are usually made of stainless steel or bronze. Composite pulleys have multiple layers and can be a single unit or many different components. There are 3 main types of pulleys: fixed pulleys and composite pulleys. These are the most common types. Almost every type of pulley is used for some type of application.
Fixed pulleys have 1 advantage over movable pulleys: they change direction as the weight of the load increases. They are typically used in heavy construction equipment. Gun tackles, patio tackles, and stationary tackles are examples of equipment that use a pulley mechanism. These devices are very common and can be found on most modern construction sites. They provide great convenience for lifting large loads.


What are the applications of pulleys? Simply put, a pulley is a mechanical device that transforms a difficult task into an easier one. It consists of ropes and pulleys. It is usually used to lift objects. Usually, people wrap a rope around a pulley and pull up to lift the object. One disadvantage of using pulleys is that they require the same force as lifting the object directly.
One of the most popular applications of pulleys is lifting heavy objects. They help people pull up heavy objects and blocks. The system can also be used in seeders, lifts, grinders, etc. Other applications include raising flags, loading cargo, pulling curtains and rock or mountain climbing. Students can learn about the various uses of pulleys and the physics behind them.
Pulleys can be made of many different materials, depending on the application. Some are movable, which means they move with the object they are used to lift. This pulley system can be made of nylon, wire rope or fiber material. The best part about these systems is that they are easy to install and maintain. For a better grasp, use the guide or video tutorial to learn more about the pulley system and how it works.
Tapered pulleys are common in paper mills. They are high-quality pulleys that transmit power to connected parts. They can be dynamic or static and have different balances. Because pulley systems are highly customized, most industrial applications require systems designed specifically for specific applications. In this way, the system is safe, simple and inexpensive. The benefits of this design are endless.
The most common use of pulleys is for motor drives. They are used to minimize noise by applying force to the shaft to reduce the workload. They are also less expensive than gears and do not require lubrication. Furthermore, they can change the direction of the applied force. They are also less expensive than gears and are often used with other components. A screw is a cylindrical member with helical ribs used to connect something.


Although the pulley system makes it easier to move heavy objects, it still has some drawbacks. When using a pulley system, you must remember that the force required to lift the weight increases with the number of cycles. In addition, the distance between the puller and the heavy object increases, which may lead to accidents. Also, moving heavy objects can be tricky if the rope slips. Pulley systems are not very expensive and can be easily assembled. However, it does require a lot of space.
First, it is not efficient. Besides being inefficient, pulleys produce different forces at different speeds. Fixed pulleys use more force than the load, while movable pulleys move with the load. A movable pulley requires less force than a fixed pulley, but the combined system travels a long distance. Therefore, this method is not as efficient as the fixed method.
Pulleys are not only used in industrial processes. You can see them in various places in your daily life. For example, large construction cranes use pulleys to lift heavy loads. Even flagpoles, blinds, clotheslines, ziplines, motors and climbing equipment use pulleys. Still, despite their advantages, the disadvantages are not too serious.
Another disadvantage of the pulley is its wear and tear. While a pulley’s housing is theoretically infinite, its bearings and locking components typically wear out over time. To overcome this problem, a new bearing and locking assembly can be installed. No need to replace the housing and shaft, the entire assembly can be re-bonded and painted to replicate the original look. Alternatively, the pulley can be replaced with a new housing and shaft.
Using pulleys can also reduce the advantage of pulleys. On the other hand, interception and tackle is a system in which 2 pulleys are connected to each other using ropes. Unlike pulleys, pulley pulley systems can be adjusted in the direction of travel and can move heavy loads up to 4 times their force when used in hydraulic lifts.

China Standard Xgf-8-8-3 Glass Bottle CZPT Rinsing Filling and Capping Machine     with Good qualityChina Standard Xgf-8-8-3 Glass Bottle CZPT Rinsing Filling and Capping Machine     with Good quality