China supplier HDPE milk bottle recycling washing line with Good quality

Product Description

Product Description

Rigid PE/PP/ABS/PS Bottle, Bucket, Hollow Container Recycling Machine
This HDPE milk bottle recycling washing line is used to recycling the waste HDPE/LDPE/PP Bottles and buckets, hollow container and so on.
The production line including the conveyor belt, metal detector, plastic wet crusher, floting washing tank, high speed friction washer, centrifugal dewatering machine, drying system and label separating machine, material collecting packing system.
After crushing, washing and drying, we will get clean pe pp bottle flakes. We also can customized it for you according to your special requirement.

Product Parameters

Model

Capacity 

Installed Power 

Water Supply 

Area Required

MEB-300

300kg/hr 

130KW 

5-6m³/hr

38*4.5*5m 

MEB-500

500kg/hr

145KW

7-8m³/hr

38*4.5*5m

MEB-1000

1000kg/hr

190KW

8-10m³/hr

42*5*5m

MEB-1500

1500kg/hr

230KW

10-15m³/hr

45*5*5m

MEB-2000

2000kg/hr

280KW

15-20m³/hr

45*5*5m

Working Flow

— Belt conveyor: feeding the plastic bottles into the crusher. If there is any scrap metal inside the bottles, semi-auto metal detector is suggested.   
— S-series crusher: with water, crush plastic bottles into small size (size is adjusted as buyer request)
— Friction washing loader machine: washing out the sand, soil from the material and loading out the material
— Floating washing tank: washing out the dirty from the material
— Screw loader: loading the bottle flakes to the next step
— Horizontal friction washing dewatering machine: washing out labels, dirty and remove dirty water
— Floating washer tank: washing out the dirty from the material
— Screw loader: loading the bottle flakes into the next step
— Dewatering machine: remove the water from the material
— Hot air drying system: drying the bottle flakes
— Storage hopper: collect the flakes
— Control cabinet: control the line on/off (famous brand such as Schneider, Siemens, etc.)

This HDPE milk bottle recycling washing line can be displayed “L” or “U” shape according to clients’ workshop.
We can also customize the washing line according to client’s material and product requirement.

Detailed Photos

Plastic Crusher Machine 

Function: crushing the material into flakes

>With water inlet can do wet crushing

>Use big roller bearing ensure durable use

>With heavy duty pulley easier for machine working
>Bearing house is installed outside of the chamber so no dirty goes inside which prolong the lifespan
> Upside hopper is covered by shelter so no flakes popped out.
>Blades adopt famous brand SKD-II or D2

Friction washing loader 

Function: Friction washing the material and loading up it

>With water injection system into the rotor for better washing and also clean the screen mesh
>The screen is with fast clip to tight and loose for easy maintenance
>Up and down both mounted with bearing design ensure low maintenance and long use life
>Machine washing part is made by stainless steel 304

Floating washing tank 

Function: Floating washing separate the sand, soil and other dirties

>The roller is specially made can have more washing for flakes but less water take out
>Bottom with positive and negative screw to pushing the dirty into middle

>With a side screw loader to loading out the sinking material
>Machine washing part is made by stainless steel 304

Horizontal dewatering machine 

Function: take out dirty and remover water from the bottle flakes

>With high rotary speed 1500rpm

>Roller bearing is fixed outside of the rotor for durable use
>Inside with mesh layer, mesh diameter size: 3mm
>With water spray system to clean the mesh
>With fan blower inside that can blow out the bottle flakes directly which saves 1 set of screw loader
>Outside cover drum is made by stainless steel with 3mm thicknes

Hot air drying system 

Function: with hot air further drying the plastic bottle flakes

>Heating by electricity

>Pipe is made with bigger and more thickness elbow for longer use

>Pipe is made by stainless steel with 3mm thickness

>Can select 2 sets of this pipe drying system to arrange 1 by 1 for better drying effect

Related Product

Double stage die-face cutting plastic pelletizing line                                         Double stage strand-cooling cutting plastic pelletizing line

Company Profile

ZheJiang MOOGE MACHINE CO.,LTD is a professional manufacturer specialized in designing, developing, manufacturing, and servicing a complete line of plastic recycling machine with over 10 years’ experience.
Our high quality machine and good service are all well received by numerous customers from domestic and overseas. We are expecting to make contribution to the global environmental protection and seek the long-term business partner all over the world.

Packaging & Shipping

• For the loose cargo we will packing by wooden box
• For the full container loading we are packing the machine by film and some on pallet accordingly
• We can ship the goods by air or by sea
• We will send pictures of cargo loading to our client to check and keep recording
• We can send cargo to client’s warehouse to loading

After Sales Service

• Pre-sale: we give our client the detailed technician offer, sign the sales contract etc.
• In-sales: we supply the details layout, installation instruction, and technician support for the clients.
• After sales: we arrange engineer to install the machine and train the workers for our client.
• We have 24 hours service line to solve the after sales problem.
• We have free spare parts with the machine.
• We supply long term spare parts for every customer.
• We always update the new technology to every customer.

In order to match your requirement and provide you a proper quotation, please Let us know:
• What material do you want to recycling? PE film? PP woven bag? HDPE/PP bottle? or other plastic?
• What capacity(kg/h) do you want?
• What is the final size(mm) of flakes you want?
• Other special requirements about the HDPE milk bottle recycling washing line you want.

 

What is a pulley?

Pulleys are shafts or wheels on a shaft that support the movement and change of direction of a taut cable. The pulley also transfers power from the shaft to the cable. A simple pulley is used to raise the school flag. Read on to learn about the basic types of pulleys. We also covered the use of pulleys in everyday life. Read on to learn more about this important mechanical part.
pulley

composite pulley

A composite pulley is a mechanical system where 2 or more pulleys and ropes are connected together. It reduces the force required to lift the load because the force is divided by the distance of each pulley. Distance is equal to the mass of the object. Composite pulleys are a common mechanical system on sailboats. Composite pulleys can be used to lift heavy equipment such as sails.
The compound pulley unit consists of 2 pulleys, 1 fixed and the other movable. The fixed pulley is fixed overhead, while the movable pulley is connected to the load by a chain. The lift applies force to the other end of the rope. Anchor points are attached to fixed joists, ceiling joists or sturdy branches. The chain should be long enough to support the load during lifting.
Composite pulleys can be made from a variety of materials. Some are fixed and remain fixed. Others are detachable. The composite pulley combines the advantages of both types, making it a versatile tool. In the table below, these 3 types of pulleys are compared. It’s easy to see which 1 is best for your needs. The right choice depends on your specific needs and budget.
The compound pulley system consists of 2 fixed pulleys and 1 movable pulley. The compound pulley system multiplies the force by a factor of 2. The compound pulley system is particularly suitable for heavy loads and is ideal for construction sites. Workers apply less than half the load force on the composite pulley, significantly reducing the force required. This is a major benefit for many people.

Fixed pulley

Fixed pulleys are fixed gears of fixed length that are mounted on solid objects. There are many different types of pulley systems. Some cooperate with each other, but not “fixed”.
Fixed pulleys can be used for a variety of purposes. One application is to lift small objects. They have a one-to-1 mechanical advantage. Often, a single pulley can lift small loads. The force required to lift a single fixed pulley remains the same. They are usually used to lift lighter objects. They can even be attached to buckets used to draw water from wells.
While single fixed pulleys have desirable mechanical advantages, they are not suitable for force multipliers. Because their mechanical advantage diminishes over time, they are not effective force multipliers. They are used to redirect work so that it can be applied in the most convenient direction. This mechanical advantage is the main advantage of fixed pulleys and the most common way of moving objects. They have several benefits, including the ability to increase the speed of moving objects.
Another application for fixed pulleys is lifting supplies. A scaffold can weigh more than 1 and can be directly hoisted. In order to facilitate the transportation of materials, fixed pulleys are usually installed on the top of the scaffolding on construction sites. Then thread the rope through the edge of the groove that holds the pulley. The fixed pulley exerts the same force on the pull side as on the push side. The same is true for moving objects with fixed pulleys.
pulley

moving pulley

A movable pulley is a device whose part is fixed to another object, usually a rod or beam. The movable part moves with the load, making the load feel lighter. This is a useful tool for those who need to carry heavy items such as large bags. The advantages of moving pulleys are many. Here are some of them. Read on to learn more about them.
One of the most common uses of movable pulley systems is climbing high objects. Climbers act as pulley loads and pull ropes to lift objects. Eventually, when the traction stops, the climber descends. However, it is still a useful tool in other situations. The movable pulley system can help you climb the tallest objects or lift them to level surfaces.
Another example of movable pulleys is in industry. Depending on the load, movable pulleys make handling and moving loads easier. You can use them in a variety of applications in manufacturing and industry, including cleaning. For example, the American flag is raised and lowered every day. Removable pulleys are a handy tool when buildings need cleaning.
If you’re not sure whether a task requires a pulley, a zipline might be a good option. Connect the 2 ends of the rope and the pulley will move along the rope, then attach the rope to the metal cable. The load is the person holding the pulley, and the force comes from the attachment on the other end of the rope. There are 2 types of live pulleys: simple pulleys with just 1 wheel and live pulleys with many ropes attached.

School flag raised with simple pulleys

How is the school flag raised? It is pulled up by a rope attached to a pulley at the top of the pole. When the rope is pulled, the pulley turns, raising the flag. A pulley is a simple mechanism that helps people move heavier objects with ease. The rope must be securely attached to the pulley to keep the flag stable.
A simple pulley is a spinning wheel with grooves on 1 side and ropes on the other. The rope can be any length and the wheels can be any size. The rope has to go through the groove and the load is attached to the other end of the rope. Simple pulleys are pulleys with fixed shafts. An example is the wheel on a school flagpole.
A simple pulley system consists of a primary pole, a secondary pole and an outer member. The primary flagpole is connected to the track by a detour, while the secondary flagpole is connected to the track by a pipe. There is a groove on 1 side of the track, which passes through the inner cavity of the flagpole. An open track at the upper end of the track connects the 2 parts of the pulley.
A simple pulley can be used for many purposes. This is a useful machine that can be used to raise the flag. Among other things, it can be used in clothing lines, bird feeders, and even roofers. And, of course, you can use the pulley to raise the flag. Its versatility makes it an essential part of school decor.
pulley

cast iron pulley

If you are looking for pulleys for your machine, you may come across cast iron pulleys. They are usually cheap and available in a variety of sizes. The rim is held in place by a mesh attached to a central boss. The arms and spokes can be straight or curved, but most are oval. There are many uses for this type of pulley.
You might wonder why the arms of cast iron pulleys are so curved. Bent arms tend to yield rather than break. Cast iron pulleys are usually round with a slight bump on the rim, which helps keep the belt centered on the rim as it moves. On a 300mm diameter pulley, the bumps may be as small as 9mm.

China supplier HDPE milk bottle recycling washing line     with Good qualityChina supplier HDPE milk bottle recycling washing line     with Good quality