China supplier Jaw Crusher for Rock Ore Slag Steel Coal CZPT near me supplier

Product Description

jaw crusher for rock ore slag steel coal stone

1. Introduction
Stone crusher plant is used to produce aggregate of limestone, granite, basalt, river stone, marble, iron ore, dolomite, quartz, slag etc. It is widely applied for hydraulic power, construction, highway, railway, airport runway, civil engineering projects, etc.
1. This CZPT crusher plant is mainly applied to medium or over-hard ores and stones, such as granite, iron ore, marble, etc. Its capacity can be 30-50 tons per hour, final aggregates size can be 0-10,10-20,20-30,30-40mm(changeable)
2. Primary jaw crusher is equipped with enhanced jaw plates and has high reduction ratio. Main frame and flywheels use thicker steel plate; We apply impact crusher,cone crusher or jaw crusher as the secondary crusher.(optional)
3. Water pipe or other washing equipment are equipped to clean the finished products.(optional)
4. Tertiary crusher(VSI )sand making machine or others may work as additional processing machines to diversify the final products. Tailor-made dust catcher or dust cover can also be applied to this plant.(optional)

2. Application

Stone crusher plant make use of a large range of equipment, such as intake hopper vibrating feeder or pre-screener, crushing unit(such as jaw crushers, impact crusher, heavy type hammer crusher, and cone crusher etc), vibrating screen, loading belt conveyor and other needed machines(dust suppression system, sprinkler system, dust remover machine etc)

3. Features
1.High degree of automatic operation; the entire production line requires almost no manual operation except for machine starting and stopping, routine maintenance.
2. High productivity, low investment, and good appreciation.
3. Regular end product granularity, good CZPT shape, and low powder output.
4. Adopting high advanced control system to ensure security and reliable operation of the entire production line.

Your can choose mobile or stationary CZPT crushing plant according to your own requirements.

 

4. Configuration of CZPT crusher plant

The CZPT Crushing Plant mainly consists of Vibrating Feeder, Jaw Crusher, Cone Crusher or Impact Crusher, Vibrating Screen, Belt Conveyor and Control System, etc. It is completely capable to crush and screen limestone, marble, granite, basalt, river gravel and other hard CZPT materials, and produce sand & gravels with various granularities for construction and building industry. We are CZPT to design and manufacture complete crusher plants with capacity from 20tph to 500tph, and to provide optimum and most economical solutions according to customers’ requirements on CZPT specifications, output, application, etc. 

5. Working process
1. Raw materials are evenly conveyed into jaw CZPT crusher for primary crushing via the hopper of vibrating feeder.
2. The crushed CZPT materials are conveyed to crushing plant by belt conveyor for secondary crushing before they are sent to vibrating screen to be separated. 
3. After separating, qualified materials will be taken away as final products, while unqualified materials will be carried back to the CZPT crushing equipment for re-crushing.
4. Customer can classify final products according to different size ranges. All the final products are up to the related standards within and beyond China. Dust is generated during the working process while the dust control units are needed. crushing plant is mainly composed with vibrating feeder, jaw crusher, cone crusher / impact crusher, vibrating screen, belt conveyor and electrical controlling system. Capacity can be 20-500t/h. For different requirements on finished products sizes also can equip with cone crusher.

6. Project cases

7. Customer visit

8. Shanman service

  1. Assist clients to choose the suitable machine
  2. Design and manufacture machines according to customer’s special requirements
  3. The company is free of charge to the user on-site engineering and technical personnel plHangZhou site for the user to design the best processes and program
  4. Arrange for visiting our factory, assist them to handle relative procedure, such as visa.
  5. Make sure goods prepared within delivery time;
  6.  Pre-check and accept products ahead of delivery;
  7. Prepare documents required to help customer pass customs clearance.
  8. Help clients to make Project evaluation and feasibility analysis and draft solving plans.
  9. Provide technical engineers to CZPT the installation;
  10. Train clients worker how to operate;
  11. Offer spare parts at a best price for long term.

9. Spare part supply

 10. Packing & shipping

11. Questions you may have

Q: Are you mining machinery manufacturer?
A: Yes, our company warmly welcome clients to visit our factory at anytime. We can also provide samples test, mine design, equipment manufacture, after-sale service, etc…

Q: how to choose the suitable machine?
A: To design a suitable machine, please let me know the following information:

  1. what kind of CZPT do you want to crush ? like limestone ? or granite ?
  2. what’s the size of your CZPT before crush ? how many inch or mm ?
  3. how big capacity do you need?2t/h?10t/h?100t/h?
  4. what’s your requirements of final product size ? how many inches or mm ?0-5mm?5-20mm? Or others?
  5. you only need 1 set of crusher or a whole crushing line? (Include the feeder ,crusher, screen, conveyor and so on)
  6. You need mobile crushing machine or stationary one

Q: How long is the warranty of your machine? Does your company supply the spare parts?
A: the warranty period is 1 year. we will supply the spare parts for you any time.

Q: If I buy a complete mineral processing line, can you help us to build it?
A: Yes, we can help you combine a complete mineral processing line and give you related professional advice. We had already build many mining projects in China & Overseas.

Q: how about the installation?

A: Supplier provides a full set of installation drawings and instructions. If the buyer need supplier do the installation, supplier will provide technical engineers to CZPT the installation, and train buyer’ workers. Buyer should take the charges for technicians and pay them salary.

Q: what is the payment Method?
A: By T/T, L/C,  Western Union, Money Gram, and so on. 
 
12. Small series crusher

13. Related Products

14. About us
Shanman Machinery Crusher Production Base is a company specializing in the production of jaw crushers, impact crushers, cone crushers, sand making machines, vibrating feeders, vibrating screens, mobile CZPT crushers and other crushing and screening machines. The company was founded in 2571, covers an area of 20,00 square meters, has more than 100 employees, 5 chief engineers and more than 10 after-sales service personnel, these can ensure your solution. Shanman has now become a production and export base for the crushing and screening industry.
As a production plant, we can produce crushing and screening machines according to your actual needs. Many models we develop and produce are designed and produced according to different customer requirements. You can let us know your thoughts, and professional engineers will help you.
Our mission
Carry out independent and innovative research in the design field of crushing and screening equipment and devote to the production of the most suitable equipment.
We are committed to producing high-quality and cheap machinery.
Production of machines for people in need, production of the most suitable machines
Our vision
Establish a first-class production base to inject power into the crushing and screening industry
Join hands with Shanman to create a better future

What Is a Pulley?

The pulley is a wheel mounted on a shaft or axle. Its purpose is to support the movement of a cable that is taut. This cable transfers power to a shaft. However, there are certain safety precautions that you should follow when using a pulley. Read on to learn more! Listed below are common uses and their main parts. Listed below are some of the benefits of using a pulley.
pulley

Common uses of a pulley

A pulley is a common mechanical device used to increase the force needed to lift a heavy object. Most commonly, these devices are used in construction equipment. These machines use high-10sion ropes to transfer heavy objects from 1 floor to another. Other common uses of a pulley include buckets and flagpoles. These devices are extremely useful in a wide range of applications. To learn more about the common uses of pulleys, keep reading.
A pulley is a wheel with grooves for holding rope. Its purpose is to change the direction and point at which a pulling force acts. It is usually used in sets to reduce the amount of force needed to lift a load, but the work involved is similar. Pulleys are also used in rock climbing devices. For many applications, a pulley is a vital part of construction.
The most common use of a pulley involves hoisting and lowering a flag. Other examples include clotheslines, bird feeders, and escalators. Pulleys are also commonly used on oil derricks. Many other common applications include hoisting and lowering garage doors. Pulley systems are also used in engines and cranes. For more information, check out our interactive pulley diagram!
Pulleys can also be used to lower total work required for a task. In many cases, a pulley will consist of 2 parts: the pulley hub and the shaft pulley. The hub clamps the shaft pulley, while the pulley itself is connected to the motor or other device. If you’re looking for a pulley, it’s important to learn how it works.
The most common uses for a pulley involve lifting heavy objects, and the mechanism used to lift them is known as a pulley. A pulley is an industrial device that uses 2 wheels to reduce the force needed to lift a weight. The pulley reduces this force by half by allowing the user to pull on the rope 4 times as far. The pulley also allows for a smaller lifting distance.

Main parts of a pulley

A pulley consists of the main element of a system. This is typically a cable, rope, belt, or chain. There are 2 basic types of pulleys – a Driver Pulley and a Follower Pulley. Pulleys are available in small and large sizes. The periphery part of the pulley is called the Face, and the protruding middle part is called the Crown. A pulley’s face can be round, rectangular, or even “V” shaped.
The first pulley was created by the Greek mathematician Archimedes in the third century BCE. These simple machines are made of a rope, an axle, and a wheel. The pulley’s end is attached to a person, object, or motor. These machines can be used in various tasks to lift heavy objects. The pulley is a great mechanical advantage for any lifter.
The ideal mechanical advantage of a pulley is defined by the number of rope segments that pull an object. The higher the number of loops on the rope, the higher the mechanical advantage. The greater the mechanical advantage, the less force is required to move the object. Likewise, the greater the distance the rope traverses, the higher the mechanical advantage of a pulley. There are several different types of pulley, depending on their combination of rope, wheel, and rope.
The basic components of a pulley are the face and hub, and the rope is threaded into the center of the pulley. The pulley is usually made of a rope and can be used to lift heavy weights. It can also be used to apply great force in any direction. Step pulleys have multiple faces, which are fixed in sequence. They can also increase the speed of the driven pulley.
A pulley is a simple machine consisting of a wheel, rope, or chain. These parts are crucial for making moving and lifting easier. Because they change the direction and magnitude of force, they can be a useful tool. Some pulleys even change direction. You can learn more about the pulley by downloading this resource today. The resources are designed to support the new 9-1 GCSEs in Design & Technology and Engineering.
pulley

Mechanical advantage

Pulleys have been used to move heavy objects for centuries. When 2 rope sections are used, the weight of a 100kg mass can be moved with only 500 newtons of force. Adding an extra pulley increases the mechanical advantage. If the pulley has 2 wheels, the distance between the rope sections and the wheel grooves is only half the distance, but the mechanical advantage still applies. Adding another pulley increases the mechanical advantage, but can be risky.
Mechanical advantage is the ratio of force used versus force applied. The calculations are made under the assumption that the ropes and weights do not elongate or lose energy due to friction. If the weights are very light, the mechanical advantage is greater than that in the real world. To calculate the mechanical advantage, the weight of the load to be lifted must be the same as the weight of the person using the pulley.
A single moveable pulley has a mechanical advantage of two. The weight passes around the pulley, and 1 end of the rope is attached to a fixed point. The pulling force is then applied to the other end of the rope. The distance the weight travels doubles, or halved, depending on the direction of the pulley. Adding a second pulley reduces the distance and the effort required to lift it.
There are several ways to calculate the mechanical advantage of a pulley system. Some methods are specific to certain types of systems, while others work for all systems. The T-Method is a good choice in many applications, as it calculates the units of tension for each rope segment. Once you have determined the input force, you need to determine the maximum force that will be applied to each component. A compound pulley, for example, will require 4 units of tension for each rope segment.
In simple terms, the effort is the amount of force needed to lift the load. This force is measured in newtons (N). A mechanical advantage is often presented without units. If the student does not have this unit, you may need to convert the units to newtons, since 1 kilogram is equal to 10 newtons. If you can’t figure out the units of effort, you can use the KWL chart provided by the teacher.
pulley

Safety precautions

There are a few safety precautions you should take when using a pulley. First, always check the SWL (safe working load) before attaching anything to the pulley. This indicates the maximum weight and angle the pulley can safely handle. Second, make sure that your work area is free from people and debris. Third, wear a hard hat to protect your head from blows and falling objects.
Another important consideration is anchoring. Although the pulley reduces the weight of an object, it is not enough to eliminate the weight. This is especially true if you are hoisting a heavy object, such as a motorcycle or lawnmower. It is important to ensure that the anchoring point can support the entire weight of the load. It is also important to follow proper anchoring procedures when using a pulley to lift a motorcycle or lawnmower.
In addition to the safety latch, you should use a tag line to control the suspended load. Remember that a chain pulley block is necessary for vertical lifting. You should also wear personal protective equipment (PPE) while using a pulley to avoid injuries. If your workplace does not have an PPE policy, you should consider implementing a similar policy. These safety guidelines are a good start.
If you are using a pulley to lift heavy objects, make sure to wear gloves. Those who are not familiar with rope-pulling will have an easier time demonstrating how it works. If you are using a rope-pulley system in a classroom, be sure to follow lab safety guidelines. Wear cloth gloves, clear the area, and do not jerk the rope. In addition, never allow yourself to be pulled into the rope by an unfamiliar person.
Another important safety precaution when using a pulley is to ensure that the anchor point for your system is adequate to support the weight of the object being lifted. Check with the manufacturer of the pulley to find out what its weight limit is, as some types of pulleys are designed to lift much heavier weights than others. It is important to follow all manufacturer’s instructions when using a pulley.

China supplier Jaw Crusher for Rock Ore Slag Steel Coal CZPT     near me supplier China supplier Jaw Crusher for Rock Ore Slag Steel Coal CZPT     near me supplier