China Best Sales Factory Price Stainless Steel Ss Wire Straight Line Wire Drawing Machine near me shop

Product Description


Machine Introduction


Stainless steel straight line wire drawing machine


Production process :
1. Wire drawing process 5.5 mm to 1.6 mm

Stainless steel wire coil—Boron coating drying treatment—straight line wire drawing machine—Wire cleaning system— Spool wire take-up system


2. Annealing process

Spool paying off system—Electrolytic pickling tank—Clean ( water washing)(Alkali washing) — Dry — Annealing(hydrogen)—Cooling tank —Spool wire take-up system(1.6 mm, 1.8 mm)

Stainless steel wire drawing machine is 1 of the common metal wire processing equipment. It can stretch 201,304,310,316,410,430 etc.


The error of straight wire drawing machine is 0.1%, and the meter is calculated accurately; Fixed length automatic deceleration and stop; Disconnection detection and automatic shutdown; Positive and negative inching and left-right linkage of any drum; Display of various fault information and processing information; Various motion information monitoring.

Machine Specification








Capstan diameter






Drawing dies






Inlet wire diameter






Outlet wire diameter






Drawing speed






Total reduction rate






Motor power







Our Advantages



Wire Pay off system.

Pay off system is usually according to the type in the picture, pneumatic lifting pulley, convenient wire threading.

Boron coating system.

The upper part of boron coating system is boron coating function, and the lower part is automatic drying function.

Drawing drum.

The drum of drawing machine adopts narrow slot water cooling, which has good cooling effect. And it is not easy to enter the dust. The drum is sprayed with tungsten carbide coating to prolong the service life.



Die box.

The die box adopts special design and adds fixture, which makes it easier for wire drawing powder to adhere to the wire surface.

Wire cleaning system.

The finished wire will pass through the cleaning device after drawing, and the finished wire is clean and smooth without impurities.

Spool wire take-up system.

Take up system can choose coil type or bobbin type,the size can be customized according to requirements.


Our service

Company Information


Factory History.

ZheJiang Kaiye Machinery Equipment Co., Ltd. was established in 2002. We are mainly engaged in the R & D, design, production and sales of CNC steel wire processing equipment, providing overall solutions for CNC steel wire processing. Products are widely used in railway, highway, bridge, tunnel, real estate, animal husbandry and other large-scale infrastructure construction, steel processing and distribution center and other fields.

Factory R&D Team.

The factory has a strong and experienced R&D team. The average working experience of each engineer is more than 8 years.

Our technology is along the most advanced international route, and we can design reasonable solutions according to the requirements of customers.

Factory workshop.

We have our own wire mesh machinery and several pilot plants with strong technical force and advanced production and checkout equipment.Our main products: straight line wire drawing machine,Pulley wire drawing machine, wet drawing machine, Copper wire drawing machine, Stainless steel wire drawing machine, Galvanized wire production line, Wire winding machine, And other supporting machine and accessories.


Customer and Market


Friends from all over the world.


The company’s machinery and equipment sell well in China, and are exported more than 100 countries and regions such as Romania, Lithuania, Turkey, Poland, Belarus, Ukraine, Russia, Kazakhstan, Saudi Arabia, Egypt, Algeria, South Africa,Vietnam, Thailand, India, Pakistan, Philippines, Indonesia, Australia, Mexico, Colombia, Argentina, Xihu (West Lake) Dis.via, Brazil, etc.

After more than 10 years of development, the company has grown into 1 of the leading enterprises in the industry. We adhere to the tenet of “customer first, technology leading”. In the future, the company will comprehensively promote industrial development and upgrading, and build the world’s leading steel processing equipment.


Q: Are you a trading company or manufacturer?
A: Our company is a factory integrating production and sales. We can provide competitive prices and services.

Q:Where is your factory located?
A: Our factory is located in Xihu (West Lake) Dis. county, ZheJiang Province of China. The nearest airport is ZheJiang airport or HangZhou airport. We can pick you up from HangZhou city.

Q: How many years are your company engaged in the wire drawing machines?
A: More than 20 years. We have our own technology develop department and testing department.

Q: Can your company send your engineers to my country for machine installation, worker training?
A: Yes, our engineers went to more than 60 countries before. They are very experienced.

Q: What’s the guarantee time for your machines?
A: Our guarantee time is 2 years since the machine was installed in your factory.

Q: Can you export and supply the customs clearance documents we need?
A: We have much experience for exporting. And we can supply the CE certificate, Form E, certificate of origin etc, your customs clearance will be no problem.

If you are interested in our machines, 
please contact us now,
We will provide you with professional and reasonable solutions.

Calculate the ideal mechanical advantage of pulleys

The basic equations for pulleys can be found in this article. It will also cover the different types of pulleys, the ideal mechanical advantages of pulleys, and some common uses of pulley systems. Read on to learn more! After all, a pulley is a simple mechanical device that changes the direction of a force. Learn more about pulleys and their common uses in engineering.

pulley basic equation

Pulleys work the same way as gravity, so they should withstand similar forces. Newton’s laws of motion can be used to calculate the forces in a pulley system. The second law of motion applies to forces and accelerations. Similar to this is Newton’s third law, which states that the directions of forces are equal and opposite. The fourth law dictates the direction of force. The Fifth Law states that tension is in equilibrium with gravity.
A pulley is a simple mechanism that transmits force by changing direction. They are generally considered to have negligible mass and friction, but this is only an approximation. Pulleys have different uses, from sailboats to farms and large construction cranes. In fact, they are the most versatile mechanisms in any system. Some of their most common applications and equations are listed below.
For example, consider 2 masses m. Those of mass m will be connected by pulleys. The static friction coefficient of the left stop is ms1, and the static friction coefficient of the right stop is ms2. A no-slip equation will contain multiple inequalities. If the 2 blocks are considered to be connected by a pulley, the coefficient of kinetic friction is mk. In other words, the weight of each block carries the same mass, but in the opposite direction.

Types of pulleys

A pulley is a device used to pull and push objects. Pulley systems are ropes, cables, belts or chains. The “drive pulley” is attached to the shaft and moves the driven pulley. They are available in a variety of sizes, and the larger they are, the higher the speed of power transmission. Alternatively, use small pulleys for smaller applications.
Two-wheel pulleys have 2 mechanical advantages. The greater the mechanical advantage, the less force is required to move the object. More wheels lift more weight, but smaller pulleys require less force. In a two-wheel pulley system, the rope is wound around 2 axles and a fixed surface. As you pull on the rope, the shafts above slowly come together.
Compound pulleys have 2 or more rope segments that are pulled up on the load. The mechanical advantage of compound pulleys depends on the number of rope segments and how they are arranged. This type of pulley can increase the force by changing the direction of the rope segment. There are 2 main types of pulleys. Composite pulleys are most commonly used in construction. The ideal mechanical advantage of pulleys is 2 or more.
Construction pulleys are a basic type. They are usually attached to wheel rails and can be lifted to great heights. Combinations of axes are also common. Construction pulleys can be raised to great heights to access materials or equipment. When used in construction, these pulleys are usually made of heavy materials such as wood or metal. They are secured with ropes or chains.

The ideal mechanical advantage of pulleys

The pulley system is a highly complex system with high mechanical advantages. Use a single pulley system to reduce the force required to lift an object by cutting it in half. The mechanical advantage increases as you add more pulleys, such as 6 or seven. To calculate the mechanical advantage of a pulley system, you need to count the number of rope segments between the pulleys. If the free end of the rope is facing down, don’t count it. If it’s facing up, count. Once you have your number, add it up.
The required mechanical advantage of a pulley is the number of rope segments it has to pull the load. The more rope segments, the lower the force. Therefore, the more rope segments the pulley has, the lower the force. If the rope segments are four, then the ideal mechanical advantage is four. In this case, the composite pulley quadrupled the load force.
The ideal mechanical advantage of a pulley system is the sum of the mechanical force and the force required to lift the load at its output. Typically, a single pulley system uses 2 ropes, and the mechanical force required to lift the load is multiplied by the 2 ropes. For a multi-pulley system, the number of ropes will vary, but the total energy requirement will remain the same. The friction between the rope and pulley increases the force and energy required to lift the load, so the mechanical advantage diminishes over time.

Common uses of pulley systems

A pulley system is a simple mechanical device typically used to lift heavy objects. It consists of a rotating wheel attached to a fixed shaft and a rope attached to it. When the wheel moves, the force applied by the operator is multiplied by the speed of the pulley, and the force is multiplied by the weight of the object being lifted. Common uses for pulley systems include pulling, lifting, and moving heavy objects.
The oil and petroleum industries use pulley systems in a variety of applications. Most commonly, pulleys are used in drilling operations and they are installed on top of the rig to guide the cable. The cable itself is attached to 2 pulleys suspended in the derrick, where they provide mechanical energy to the cable. Using a pulley system in this application provides the force needed to move the cable safely and smoothly.
The main advantage of the pulley system is that it minimizes the force required to lift an object. The force used to lift the object is multiplied by the desired mechanical advantage. The more rope segments, the lower the force required. On the other hand, a compound pulley system can have many segments. Therefore, a compound pulley system can increase the force a worker can exert on an object.
Safety Precautions to Take When Working on Pulley Systems

There are many safety precautions that should be observed when working on a pulley system. The first is to wear proper protective gear. This includes hard hats that protect you from falling objects. Also, gloves may be required. You should limit the amount of movement in the penalty area, and you should also keep the area free of unnecessary people and objects. Also, remember to wear a hard hat when working on the pulley system.
Another important safety precaution when working on a pulley system is to check the Safe Working Load (SWL) of the pulley before attaching anything. This will help you understand the maximum weight the pulley can hold. Also, consider the angle and height of the pulley system. Always use safety anchors and always remember to wear a hat when working on a pulley system.
Safe use of chain hoists requires training and experience. It is important to read the manufacturer’s manual and follow all safety precautions. If you’re not sure, you can actually inspect the hoist and look for signs of damage or tampering. Look for certifications for sprocket sets and other lifting accessories. Look for the Safe Working Load (SWL) marking on the chain hoist.

Example of a pulley system

Pulley systems are often used to lift items. It allows you to reduce the effort to lift and move the load by applying force in 1 direction. Pulley systems can be built and modeled to fit any type of project. This resource focuses on pulley systems and is designed to support the new GCSEs in Engineering, Design and Technology. There are also many examples of pulley systems suitable for various applications.
In the study, participants who read easy text took longer to manipulate the pulley system than those who read challenging text. In general, this suggests that participants with prior scientific experience used their cognitive abilities more effectively. Additionally, students who read simple texts spent less time planning the pulley system and more time on other tasks. However, the study did show that the time required to plan the pulley system was similar between the 2 groups.
In everyday life, pulley systems are used to lift various objects. Flagpoles are 1 of many pulley systems used to raise and lower flagpoles. They can also be used to raise and lower garage doors. Likewise, rock climbers use pulleys to help them ascend and descend. The pulley system can also be used to extend the ladder.

China Best Sales Factory Price Stainless Steel Ss Wire Straight Line Wire Drawing Machine     near me shop China Best Sales Factory Price Stainless Steel Ss Wire Straight Line Wire Drawing Machine     near me shop