Product Description
High-Quality Old Road Marking Removal Cleaning Equipment
Introduces:
The ultra-high pressure water flow generated by the booster equipment loaded on the light truck is continuously fed into the hand-push washer through the hose, and then sprayed on the road at a high speed. The maximum pressure of the water can reach 300 MPa, which is 3061 kgf/cm². After the washing machine pushed through, the road surface was intact and the painted marking lines on the road were cleaned up after being swept by the high-pressure water flow.
Features of the whole machine:
1. The equipment adopts CZPT brand diesel engine of the United States.
2. The pump adopts high-quality German technology and design, which is efficient and reliable.
3. The connection between the pump and the diesel engine adopts a flexible coupling design with low noise
4. Split type high pressure pump, each alloy-coated plunger has an independent cooling system.
5. The integrated oil cooling system provides a reliable guarantee for the long-term stable operation of the pump
6. Trailer type or truck type installation can be selected by users.
7. The control cabinet is CZPT original, digital display control panel, humanized control interface, and various sensor signal displays.
8. The pressure-sensing diesel engine fuel-saving device adopts American technology. It is a specially designed fuel-saving device with a fuel-saving rate of 20-30%.
Manual Cleaning Cart Features:
1. The manual cleaning cart is equipped with a height adjustment device, which can adjust the height of the rotating head arbitrarily, which is convenient to use.
2. The washing truck is designed with a remote control switch, which can remotely control the switching of high and low pressure working states.
3. The original design of the rotating mechanism can support an extremely high pressure of 1500 bar.
4. The rotating head is driven by a 24V motor and adopts gear transmission, which is much more durable than belt transmission without loss.
5. The maximum cleaning width of the rotating head can reach 200mm, and the cleaning speed is faster.
6. The rotating head is equipped with a circular protective cover, and a dirt suction device can be added to ensure a clean and tidy work site.
Technical Parameters:
Maximum Working Pressure: 1500Bar
Maximum Input Power: 90KW
Plunger Diameter: 18mm
Gear Reduction ratio: 2.76
Equipment Size: 2.7 meters long, 1.7 meters wide, 2 meters high
Maximum Water Consumption: 26L/M
Pump Speed: 525R/M
Stroke: 66mm
Comprehensive Fuel Consumption: 11-14L/M
Load: 2.5 tons
| Type | Input Speed(min-1) | 1485 | Pump stroke | 92mm | ||||||
| DLS90 | Pump Speed(min-1) | 280 | 314 | 343 | 469 | |||||
| Plunger Diameter(mm) | Pressure(Mpa) | Flow(L/min) | Power(kw) | Flow(L/min) | Power(kw) | Flow(L/min) | Power(kw) | Flow(L/min) | Power(kw) | |
| 30 | 50 | 54.5 | 55 | 59.9 | 75 | 65.5 | 75 | 89.5 | 90 | |
| 45 | 23 | 122.8 | 55 | 134.8 | 75 | 147.3 | 75 | 201.4 | 90 | |
| 50 | 18 | 151.6 | 55 | 166.5 | 75 | 181.8 | 75 | 248.6 | 90 | |
| 56 | 14 | 190.2 | 55 | 208.8 | 75 | 228.1 | 75 | 311.9 | 90 | |
| 60 | 12 | 218.3 | 55 | 239.7 | 75 | 261.8 | 75 | 358.0 | 90 | |
| 64 | 10 | 248.4 | 55 | 272.7 | 55 | 297.9 | 75 | 407.4 | 90 | |
| Type | Plunger Diameter(mm) | Flow(L/min) | Input Speed(min-1) | Pressure Corresponding To Power(Bar) | ||
| 90kw | 110kw | 132kw | ||||
| DLS132 | 14 | 20 | 1500 | 2400 | 2800 | – |
| 16 | 25 | 1500 | 1900 | 2300 | 2700 | |
| 18 | 32 | 1500 | 1400 | 1800 | 2100 | |
| 20 | 40 | 1500 | 1200 | 1400 | 1700 | |
| 22 | 47 | 1500 | 1000 | 1200 | 1400 | |
| 24 | 57 | 1500 | 800 | 1000 | 1200 | |
| 26 | 67 | 1500 | 700 | 850 | 1000 | |
| 28 | 78 | 1500 | 600 | 720 | 900 | |
| 30 | 90 | 1500 | 520 | 650 | 800 | |
| 32 | 102 | 1500 | 450 | 550 | 700 | |
| 34 | 115 | 1500 | 400 | 500 | 600 | |
| 36 | 129 | 1500 | 350 | 450 | 550 | |
| 38 | 143 | 1500 | 320 | 400 | 500 | |
| 40 | 160 | 1500 | 300 | 350 | 450 | |
| 42 | 175 | 1500 | 260 | 320 | 400 | |
| 44 | 192 | 1500 | 240 | 300 | 350 | |
| Type | Plunger Diameter(mm) | Flow(L/min) | Input Speed(min-1) | Pressure Corresponding To Power(Bar) | |||
| 160kw | 200kw | 250kw | 300kw | ||||
| DLS300 | 18 | 33 | 1500 | 2400 | 2780 | – | – |
| 20 | 41 | 1500 | 1950 | 2430 | 2780 | – | |
| 22 | 50 | 1500 | 1600 | 2000 | 2500 | – | |
| 24 | 60 | 1500 | 1330 | 1666 | 2000 | 2500 | |
| 26 | 70 | 1500 | 1140 | 1428 | 1785 | 2100 | |
| 28 | 81 | 1500 | 985 | 1234 | 1500 | 1800 | |
| 30 | 93 | 1500 | 860 | 1075 | 1350 | 1600 | |
| 32 | 106 | 1500 | 755 | 940 | 1150 | 1400 | |
| 34 | 120 | 1500 | 666 | 830 | 1040 | 1250 | |
| 36 | 134 | 1500 | 595 | 745 | 930 | 1120 | |
| 40 | 165 | 1500 | 485 | 600 | 755 | 910 | |
| 45 | 210 | 1500 | 380 | 475 | 595 | 710 | |
| 50 | 258 | 1500 | 310 | 385 | 480 | 580 | |
| 55 | 312 | 1500 | 255 | 320 | 400 | 480 | |
| 60 | 372 | 1500 | 215 | 270 | 335 | 400 | |
| 65 | 436 | 1500 | 180 | 230 | 285 | 340 | |
| 70 | 507 | 1500 | 157 | 197 | 245 | 295 | |
| 75 | 582 | 1500 | 137 | 172 | 214 | 255 | |
1. Suitable for high-pressure and ultra-high-pressure cleaning pumps, petroleum, chemical, fertilizer process pumps, copper liquid pumps, oil fields, salt mines, liquid carbon dioxide pumps, 5 sodium slurry pumps, steel plant dephosphorization pumps, rust removal pumps, spunlace Non-woven pump.
2. Assembly method: horizontal, vertical, fixed, mobile.
3. Transmission mode: electric motor, diesel engine, gear box, belt pulley, electromagnetic speed regulation, frequency conversion speed regulation.
4. The technical parameters in the table are used as reference for selection. Each pump is equipped with a safety pressure regulating valve, and the pressure of the pump can be adjusted arbitrarily
5. The flow rate in the selection table is inappropriate. Electromagnetic speed regulation, frequency conversion speed regulation, and plunger diameter can be used to adjust the flow rate to meet the selection requirements.
6. The pump body materials include alloy steel, martensite, austenitic stainless steel, 316, 205L duplex steel.
How to Assemble a Pulley System
A pulley is a wheel that rotates on a shaft or shaft to support the movement of a taut cable. Pulleys allow power to be transmitted from the shaft to the cable.
Simple pulley
The simplest theory of operation of a pulley system assumes that the rope and weight are weightless and that the rope and pulley are not stretched. Since the force on the pulley is the same, the force on the pulley shaft must also be zero. Therefore, the force exerted on the pulley shaft is also distributed evenly between the 2 wires passing through the pulley. The force distribution is shown in Figure 1.
The use of simple pulleys is as old as history. Before the Industrial Revolution, people relied on muscle strength to carry heavy loads. Pulleys, levers and ramps make this possible. Today, we can see pulleys in a variety of systems, from exercise equipment to garage doors, and even rock climbers use them to help them reach greater heights. As you can see, these simple machines have been around for centuries and are used in everyday life.
Another simple pulley system is the pulley system. In this system, there is a fixed pulley at the top and a movable pulley at the bottom. The 2 pulleys are connected by a rope. This combination reduces the amount of work required to lift the load. Additionally, the ropes used in this system are usually made of rope and woven through the individual wheels of the pulley drum.
A pulley is an ingenious device that distributes weight evenly and can be used to lift heavy objects. It is easy to build and can be easily modified for a wide range of activities. Even young children can make their own with very few materials. You can also use simple household items such as washing machines, thin textbooks and even chopsticks. It’s very useful and can be a great addition to your child’s science and engineering activities.
The simplest pulley system is movable. The axis of the movable pulley can move freely in space. The load is attached to 1 end of the pulley and the other end to the stationary object. By applying force on the other end of the rope, the load is lifted. The force at the other end of the rope is equal to the force at the free end of the pulley.
Another form of pulley is the compound pulley. Compound pulleys use 2 or more wheels to transmit force. Compound pulleys have 2 or more wheels and can lift heavier objects. Dim is POLE2.
tapered pulley
It is important to clean and align the bolt holes before assembling the tapered pulley. The screws should be lubricated and the threads cleaned before installation. To install the pulley, insert it into the shaft keyway. The keyway should be aligned with the shaft hole to prevent foreign matter from entering the pulley. Then, alternately tighten the bolts until the pulley is tightened to the desired torque.
A tapered pulley is a basic structure. The pulley belt is arranged across 4 steps. Installed between the headstock casting and the main shaft, it is often used in the paper industry. It integrates with printing machinery and supports assembly lines. These pulleys are also available in metric range options, eliminating the need for ke-waying or re-drilling. They are easy to install, and users can even customize them to suit their needs.
CZPT Private Limited is a company that provides unique products for various industries. This large product is used for many different purposes. Also, it is manufactured for industrial use. The company’s website provides detailed specifications for the product. If you need a tapered pulley, contact a company in your area today to purchase a quality product!
Tapered pulleys are vital to paper mill machinery. Its special design and construction enable it to transmit power from the engine source to the drive components. The advantages of this pulley include low maintenance costs and high mechanical strength. Cone wheel diameters range from 10 inches to 74 inches. These pulleys are commonly used in paper mills as they offer low maintenance, high mechanical strength and low wear.
A tapered sleeve connects the pulley to the shaft and forms an interference fit connector. The taper sleeve is fixed on the shaft with a key, and the corresponding inner hole is fixed on the shaft with a key. These features transmit torque and force to the pulley through friction. This allows the tapered pulley to move in a circular motion. The torque transfer characteristics of this pulley are most effective in high speed applications.
The sleeve is the most important part when assembling the tapered pulley. There is an 8-degree taper inside the cone, which is closely connected to the inner surface of the pulley. Taper sleeves and pulleys are interchangeable. However, tapered pulleys can be damaged after prolonged use.
pulley pulley system
A pulley pulley system is a great way to move heavy objects. These systems have been around for centuries, dating back to the ancient Greeks. This simple mechanism enables a person to lift heavy objects. These blocks are usually made of rope, and the number of turns varies for different types of rope. Some blocks have more cords than others, which creates friction and interferes with the easy movement of the lifting system.
When using a pulley pulley, the first thing to decide is which direction to pull. Unfavorable rigging means pulling in the opposite direction. In theory, this method is less efficient, but sometimes requires a certain amount of work space. The benefit is that you will increase the mechanical advantage of the pulley by pulling in the opposite direction. So the interception and tackle system will give you more of a mechanical advantage.
Pulley pulleys are an excellent choice for lifting heavy objects. The system is simple to install and users can easily lift objects without extensive training. Figure 3.40 shows a pulley in action. In this photo, the person on the left is pulling a rope and tying the end of the rope to a weight. When the rope is attached to the load, the rope will be pulled over the pulley and pulley.
The blocks on the blocks are attached to the ends of the rope. This creates unique lifting advantages compared to single-line systems. In Figure 3, the tension of each thread is equal to one-third of the unit weight. When the rope is pulled over the pulley, the force is divided equally between the 2 wires. The other pulley reverses the direction of the force, but that doesn’t add any advantage.
Use pulleys to reduce traction and load. The weight of the load has not changed, but the length of the rope has increased. Using this method, lifting the load by pulling the rope 4 times reduces the force required to lift 1 foot. Likewise, if the pulley system had 4 pulleys instead of three, the length of the rope would be tripled.
The system can transmit loads in any direction. Rope length is determined by multiplying the distance from the fixed block to the load by the mechanical advantage. If the mechanical advantage is 3:1, then passing the rope through the pulley 3 times will produce the required traction distance. Also, the length of the rope will depend on the mechanical advantage, so if the load is 3 times the length of the rope, it will be more than 3 times the required length.
